Prop Nut Adapters
Check the table below to select the proper Prop-Nut Adapter
for you Engine's Crank-shaft
Engine
Manufacturer |
Size
and Type of Engine |
Crank-shaft Diameter x Thread Pitch |
| ASP / Magnum | 0.21 ABC - 0.46 ABC | 1/4"
x 28 |
| ASP / Magnum | 0.61 0.75 0.91 1.08 0.65-4S 80-4/S | 5/16"
x 24 |
| Enya | SS 0.25-.47 SS 0.25-.47BB 0.41-.46-4/S | 1/4"
x 28 |
| Enya | 0.15 SS.15 0.19 0.19X 0 .21CX 0.25X | 6
mm x 1.00 mm |
| Enya | 0.35 - 0.50 X OR CX 0 .60 -0.90 0 .60-0.90 4/S |
7
mm x 1.00 mm |
| Enya | R1.20-4/S R1.20-4/S GP | 8 mm x 1.00 mm |
| Evolution | NX .60 Glow | 1/4"
x 28 |
| Evolution | NX .61 Glow | 5/16"
x 24 |
| Fox | 0.19 -0 .50 | 1/4"
x 28 |
| Fox | 0.60 - 0 .74 Eagle | 5/16"
x 24 |
| GMS | 0.47 or Smaller | 1/4"
x 28 |
| GMS | 0.61 - 0.76 | 5/16"
x 24 |
| GMS | 1.20 | 3/8
x 24 |
| HB / HP | 0.20 - 0.25 0 .60 0.61 | 1/4"
x 28 |
| HP | VT 0.21 - 0.49-4/S 0.40 - 0.61 FRT Gold Cup | 6
mm x 1.00 mm |
| HP | 1.20 | 5/16"
x 24 |
| Irvine | 0.20 - 0.61 | 1/4"
x 28 |
K & B |
0.20 - 0.65 | 1/4"
x 28 |
| MDS | 0.25 -0 .40 | 6
mm x 1.00 mm |
| MDS | 0.46 | 7
mm x 1.00 mm |
| MDS | 0.61 | 8
mm x 1.25 mm |
| Moki | 0.61 Long Stroke (All Models) | 1/4"
x 28 |
| Moki | 0.51 RC | 6
mm x 1.00 mm |
| Moki | 2.1 RC | 10 mm x 1.00 |
| Morris | 0.45 - .61 | 8 mm x 1.25 |
| MVVS | 0.15 - 0.61 | 6
mm x 1.00 |
| OS | 0.25 - 0.50 0.61FN-H RC 0.61RFN-H FS 0.26 Surpass FS 0.48 Surpass FS 0.20 - 0.40 |
1/4"
x 28 |
| OS | 0.61FP 0.61SF 0.61RF 0.61RF-P 0.61RX-M 0.61SX-H 0.61VR-M 0.65VR 0.81VR 0.91FSR FT120II FT120 |
5/16"
x 24 |
| Picco | 0.21 - 0.45 | 1/4"
x 28 |
| Quadra | 0.35 - 2.0 | 5/16"
x 24 |
| RJL | K 0.61 | 5/16"
x 24 |
| Rossi | 0.21 | 6
mm x 1.00 mm |
| Rossi | 0.41 - 0.90 | 8
mm x 1.25 mm |
| Royal | 0.25 - 0.46 |
1/4"
x 28 |
| Saito | 1.20 - 2.7 | 8
mm x 1.25 mm |
| Saito | 0.40 0.60-4/S | 6
mm x 1.00 mm |
| Saito | 0.65 - 0.90-4/S | 7
mm x 1.00 mm |
| Saito | 1.20 - 2.7-4/S | 8
mm x 1.00 mm |
| SPE | 26cc 40cc | 10 mm x 1.5 mm (not required) |
| Super Tigre | 0.19 - 0.56 0.60G 1.60ST | 1/4"
x 28 |
| Super Tigre | S0.61 - 0.91K X-0.61K ABC RE | 5/16"
x 24 |
| Super Tigre | 250 Series | 3/8"
x 24 |
| Super Tigre | 3000 Series | 10
mm x 1.25 mm |
| Thunder Tiger | GP 0.25 - 0.42 PRO 0.25 - 0.46 F54S | 1/4"
x 28 |
| Thunder Tiger | GP 0.61 PRO 0.61 - 1.20 F91S | 5/16"
x 24 |
| Tower | 0.40 | 1/4"
x 28 |
| Webra | 0.21 - 0.60 | 1/4"
x 28 |
| Webra | 0.80 - 0.90 | 8
mm x 1.25 mm |
| YS | 0.45S ABC (side or rear ported) | 8
mm x 1.25 mm |
| YS | 0.63 side / rear | 6
mm x 1.00 mm |
| YS | 0.91 - 1.6 -4/S | 8
mm x 1.00 mm |
| Zenoah | G-23 | 8
mm x 1.25 mm |
Above information collected from a variety of resources and is believed to be accurate; however, the accuracy of the above information is NOT warranted by GS R/C.® Manufacturer's Names are the trade-mark of the respective companies The above table of information/data is the property of GS R/C is not to be copied or reproduced with out the written permission of Golden Skies R/C Aircraft, Inc.® |
||
